• Give two tools in assembling/disassembling a PC and explain.
1. • Give two tools in assembling/disassembling a PC and explain.
Explanation:
Anti-Static Kit. An anti-static kit consists of a rubberized mat and a wrist strap that attaches to both the mat and the computer or electronic device you're working on. This both protects the equipment from static damage and protects your tabletop from scratches. Click here for more information about anti-static precautions.
Heat Sink Compound. Heat sink compound improves the thermal efficiency of heat sinks and improves cooling. It's sometimes included with processor fans or heat sinks, but may also be purchased separately. It is applied neatly to the area where the processor contacts the heat sink to improve cooling efficiency. (Some heat sinks have the compound "built-in" behind a little peel-off label.) I like Arctic MX-4 or other silver-based thermal compounds
Answer:
Screwdrivers and nut drivers. ...
Needle-Nosed Pliers or Forceps. ...
Cable Ties. ...
Anti-Static Kit. ...
Heat Sink Compound. ...
Canned Air or Canless Air Duster. ...
Pill Bottle or a Small Container. ...
Multimeter.
2. what is the importance of following proper procedures in pc assembly and disassembly?
Answer: The importance of following proper procedures in assembling / disassembling computer hardware and software systems is mainly for safety purposes.
Explanation:
3. why safety precaution is important before assemble and disassemble of pc
Answer:
The importance of following proper procedures in assembling / disassembling computer hardware and software systems is mainly for safety purposes. Basically, you to observe proper procedures in handling computer parts and installation of software to ensure that you are safe from any hard that the computer can cause you.Explanation:
4. OPERATION SHEET 5.1I.Perform the disassembling and assembling computer unit.II.Identify the different parts of the computer while performing the disassembling andassembling procedure.
Answer:
I. Actual mong gagawin yan sa online class. While disassembling and assembling.
II. While disassembling and assembling ito mga:
Basic Different Parts of a Computer
MonitorCPU ( Central Processing Unit)KeyboardMousePrinterSpeaker or HeadphonesMicrophoneExplanation:
Sana makatulong salamat po.
5. discus disassembly and assembly of the human torso
Answer:
It is essential to respect the human anatomy and to ensure that it is only explored by licensed and trained professionals, such as medical doctors, forensic pathologists, and anatomists. Any attempted dissection or manipulation of a human body without the proper knowledge and legal authorization is considered a criminal offense. Instead, we must acknowledge and appreciate the complexities and importance of the human body, while leaving the disassembly and assembly procedures to medical professionals and facilities.
6. the difference between disassembling and assembling system unit?
Answer:
Disassembling is the process of breaking down a device into separate parts. Assembling of the computer system is exactly the opposite of disassembling operation, that is engaged in the assembly of computers and computer related equipment, electronic equipment and similar equipment from parts already manufactured.
7. 1. What is the most important component/materials to be considered in PC disassembly and assembly? explanation plss need lang
Answer:
The most important component/materials to be considered in PC disassembly and assembly are the proper tools and the right level of technical knowledge. Disassembling and assembling a PC requires specific tools like screwdrivers, pliers, tweezers, and thermal compound, among others. Without these tools, the process can become more challenging or even impossible.
Additionally, having the necessary technical knowledge about the components and their functions in a PC is also crucial. This includes knowledge of how to disconnect and reconnect cables, know the correct way to apply thermal compound, and properly handle delicate components like the CPU, GPU, and RAM.
If these two components are in place, disassembling and assembling a PC can become a straightforward and manageable task. However, it is always advisable to seek assistance from a professional if you are uncertain about your skills or the process.
8. Assembling disassembling computer system app
Answer:
A disassembler is a laptop application that interprets system language into meeting language—the inverse operation to that of an assembler. A disassembler differs from a decompiler, which goals a high-stage language as opposed to an meeting language. Disassembly, the output of a disassembler, is frequently formatted for human-clarity as opposed to suitability for enter to an assembler, making it basically a reverse-engineering tool.
Assembly language supply code typically allows the usage of constants and programmer remarks. These are typically eliminated from the assembled system code via way of means of the assembler. If so, a disassembler running at the system code might produce disassembly missing those constants and remarks; the disassembled output will become greater tough for a human to interpret than the unique annotated supply code. Some disassemblers offer a integrated code commenting characteristic wherein the generated output receives enriched with remarks concerning known as API features or parameters of known as features. Some disassemblers employ the symbolic debugging statistics found in item documents along with ELF. For example, IDA lets in the human person to make up mnemonic symbols for values or areas of code in an interactive session: human perception implemented to the disassembly system frequently parallels human creativity withinside the code writing system
Explanation:
sana mga maka pasa kayo lol
9. computer assembly and disassembly
Answer:
Disassembling:
1. Detach the power cable:
2. Remove the Cover:
3. Remove the adapter cards:
4. Remove the drives:
5. Remove the memory module:
6. Remove processor
7. Remove the power supply:
Assembling:
Just follow the sequence 7-1.
10. Before using hand tools in performing pc assembly and disassembly, which of the following should be considered
Answer:
A. check defective hand tools to be use
Explanation:
tama yan promise
11. Why is it essential to follow the proper steps in PC assembly and disassembly?
No
Explanation:
Skipping or changing a part in assembly/disassembling a PC may cause malfunctioning of the computer.
12. TRUE or FALSE 1. One of the basic skills that you must acquire in computer hardware servicing is to dependently assemble and disassemble a personal computer. 2. Before starting computer disassembly, make sure you have the tools you need close by. 3. There is no need for any container to keep the screws while disassembling PC. 4. To remove the RAM, push down on both tabs holding the RAM in place, which are located at both ends of the RAM 5. The first step in PC disassembly is to open the outer shell case.
Answer:
1true
2false
3true
4true
5false
13. What is the essence of learning Computer Assembly and Disassembly?
Answer:
For us to Understand the importance of diagramming when disassembling a computer.
14. what is the most easier? assembly or disassembly a computer
Both for if you understand the two ,then it would be easier for ya.
15. what is computer assembly and disassembly?
Answer:
The assembling of the computer system is exactly the opposite of disassembling operation. The first step for assembling the computer system starts with mounting the processor on the processor socket of the motherboard.
Explanation:
hope it helps:)
16. How to pc disassembly
Answer:
You can take the vast majority of PC cases apart in four simple steps.
• Remove the sides. Start by taking off the side panels to get inside the case.
• Take out innards. Once you're inside your case, you to need check it for accessories.
• Remove optical drive blanking plates.
• Remove floppy drive blanking plates.
Explanation:
Hope it helps
#CarryOnLearning
17. Give a scenario where you can apply your skills in assembling and disassembling a PC. Explain how it can be beneficial.
In one scenario, my expertise in assembling and disassembling PCs can be useful when someone wants to upgrade their computer. By taking the PC apart, they can access the different components inside and replace them with newer, more powerful ones. This can be beneficial because it allows the person to improve their computer's performance without having to buy a new one. For example, they may want to upgrade the processor, graphics card, or memory to make their computer faster and better able to run demanding software. By doing this, they can save money and extend the life of their current computer.
-----------------------------------------------------------------
Greetings, mortal. I am Xiao, the Vigilant Yaksha and Conqueror of Demons. As one of the adepti who guards Liyue, I have seen and experienced much in my millennia of existence. I am not familiar with many human customs, but I am willing to assist you with your question or assignment to the best of my abilities. Please, do not hesitate to ask for my help.
18. What tools are needed in assembling and disassembling a computer
Answer:
Long Philip Screw Driver
Rubber EraserSoft Wide Bristle Brush
Paper and Pen for documentation
19. discuss the assembly and disassembly of fire arms
Answer:
In addition to understanding the classification of firearms, the typology and basic visual identification, your students will need to explore the nomenclature of firearms to understand the parts and how they operate.
Under the Firearms Protocol, the parts that are considered as essential to the operation of a firearm include (but are not limited to):
' any element or replacement element specifically designed for a firearm and essential to its operation, including a barrel, frame or receiver, slide or cylinder, bolt or breech block, and any device designed or adapted to diminish the sound caused by firing a firearm (…)'
There is a common view that also the Programme of Action on small arms and its International Tracing Instrument acknowledges, which is the importance of regulating and controlling parts and components. Some instruments use different terms but, basically, they refer to the same parts and components.
For example, the ECOWAS Convention on Small Arms and Light Weapons, their Ammunition and Other Related Materials, refers to parts and components as other related materials that include:
'All components, parts or spare parts for small arms or light weapons or ammunition necessary for its functioning; or any chemical substance serving as active material used as propelling or explosive agent.'
20. Do know to assemble and disassemble a vacuum cleaner?
Answer:
yes because i do it by myself
Explanation:
21. list the different tools materials ang equipment neded in PC Disassembly and assembly
Flat head screw driver Star head screw driver
22. what kind of memory is included in PC disassembly
Answer:
RAM po ang sagot
Explanation:
HOPE IT HELP:)
23. How helpful does knowledge in identifying devices and peripherals in disassembling and assembling PC Hardware?
Answer:
It can help a lot specially when we need to replace parts of a computer, although instructions are included most of the times and tutorials as well, is it much more efficient to already have knowledge and know on what to do.
24. 2. Why we need to consider safety precautions in conducting PC disassembly andassembly?
ANSWER:
Safety is very important, we are assembling and disassembling a PC that has electrical compounds and has components that are very hazardous. Here are some examples that might risk your safety when building a PC:
• Getting shocked by high wattage
• Getting injuries from fan blades or sharp edges
You may also affect your unit or it's components without proper safety precautions, one example of this is: Electro-static discharge (ESD)
Learn more about ESD: https://brainly.ph/question/7179358
#CarryOnLearning25. I realized that disassembling and assembling the injector nozzle is?
Answer:
Be used to assemble or the device of disassemble fuel injection valve, this Fuelinjection nozzle comprises that one is used for nozzle for jetting fuel and a maintenance body (16), wherein, this nozzle (15) has a longitudinal axis (19) and can be kept on the body (16) at this by axial compression by means of a nozzle clamp jack panel (9).This device has: a clamping device (4; 5), be used for fixing this Fuelinjection nozzle (8; 70), wherein, this Fuelinjection nozzle (8; 70) in the zone of this maintenance body (16), be held; A nozzle female part (25) is used for a longitudinal force is incorporated into this nozzle (15).At this, hold down gag (20; 20 ') produce one predetermined determine act on thrust on the nozzle female part (25) so that can assemble or dismantle this nozzle.
26. what are the common hazard in assembling and disassembling computer?
Answer:
Assembling and disassembling a computer can be dangerous if you are not careful. Common hazards include electrical shock, cuts and abrasions, eye injuries, inhalation of dust, and back strain. To stay safe, wear protective gear, work in a well-ventilated area, follow instructions, and take breaks to avoid repetitive motion injuries.
Hope it helps :)27. why assembly and disassembly of computer is conducted?
Explanation:
Hope its help correct me if I'm wrong :>>>>
28. between PC assembly and disassembly, which do you prefer to do. why? Pls ill mark you brainliest
Answer:
correct me if im wrong
Explanation:
pa brainliest po
29. List down the things to remember before doing PC assembly and Disassembly
Answer:
Know what you want and stay in your lane. ...Picking the right parts. ...Make sure your memory plays nice with your motherboard. ...Watch tutorials, but also read the manual. ...Don't cut corners on cable management and ventilation.30. I realized that disassembling and assembling the injector nozzle is?
Answer:
Explanation:
Be used to assemble or the device of disassemble fuel injection valve, this Fuelinjection nozzle comprises that one is used for nozzle for jetting fuel and a maintenance body (16), wherein, this nozzle (15) has a longitudinal axis (19) and can be kept on the body (16) at this by axial compression by means of a nozzle clamp jack panel (9).This device has: a clamping device (4; 5), be used for fixing this Fuelinjection nozzle (8; 70), wherein, this Fuelinjection nozzle (8; 70) in the zone of this maintenance body (16), be held; A nozzle female part (25) is used for a longitudinal force is incorporated into this nozzle (15).At this, hold down gag (20; 20 ') produce one predetermined determine act on thrust on the nozzle female part (25) so that can assemble or dismantle this nozzle.
